|
|
 |
Saimo
Series N63 Belt Scale System
The Saimo Series N63 Belt Scale System has an accuracy
level of ¡À0.25%. It is specifically designed for plant
and process operations to monitor production, regulate
product loadout and to monitor product stock. It also
provides critical information to assist in management
of plant processes.
The Saimo Series N63 Belt Scale System combines the
N63 Trunnion-type Weighbridge, the N60 Belt Speed Sensor
and the 6101 Integrator. The load cells positioned on
the weighbridge sense the belt load and transmit the
analog weight value into the 6101 Integrator. The speed
signal of the belt conveyor is also sent to the 6101
Integrator by the N60 speed sensor. Finally the totalization
and instantaneous flow rate can be integrated after
processing both the signals received by the 6101 Integrateor.
|
|
| N63 Weighbridge |
There are three or two or one idler installed in the N63 weighbridge,
with two load cells mounted in tension with reliable stability
and minimal misalignment will be no loss of precision. Frictionless,
trunnion-type sealed pivots are fully sealed to vibration, moisture
and material accumulations, so there will no problems due to
the knife-edge and bearing fitting when used in harsh environment.
Steel tubing construction minimized dust buildups on the weighbridge
allowing less self-weight without compromising the frame riditity.
High precision strain gauge load cells are installed in tension
to support the weighbridge, ensuring minimal non-linear error.
The N63 Weighbridge can be installed directly onto belt conveyors
with belt widths between 400mm and 2,200mm. It is placed between
the upper and lower belt and needs very little vertical space.
It is factory pre-assembled to facilitate fast and easy field
installation and calibration. |
| Features |
- Designed without moving or easy-worn parts to allow minimal
requirement on maintenance.
- Side force and horizontal component force resistant design
reduces belt misalignment problems.
- Robust tube steel construction ensures reliable calibration
with minimal material buildup and zero drift.
- Mechanical distortion for the whole system < 0.1mm.
Download Belt
Scale Data Sheet ( 160 KB ) |
|
|
